Linking I-7000 And I-87K Modules For Remote I/O - ICP DAS USA VP-2117 Getting Started

ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ

3.14 Linking I-7000 and I-87K Modules for Remote I/O

Please refer to CD-ROM: \napdos\isagraf\8000\english_manu\
user_manual_i_8xx7.pdf
For detailed ISaGRAF User‟s Manual. It is listed in Chapter 6.
You can choose ONE of COM2 (RS-485), COM3 (RS-232/485) to connected.
If you choose to utilize the RS-232 of COM3, connect the COM3 Port to the
I-7520R's RS-232 Port, and for each I/O modules also connect its DATA+ to the
DATA+ signal, and the DATA- to the DATA- signal. As below diagram:
You can link up to 64 I-7000 or I-87K series remote modules to one VP-2117 PAC.
You must remember to set each I-7000 and I-87K remote module must have a
unique address, and be set to the same baud rate as the VP-2117 PAC.
For more information regarding setting up and programming an I-7000/I-87K
remote module, please refer to ISaGRAF User‟s Manual
I-7000 and I-87K Modules
3-19
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
.
VP-2117 Getting Started, Apr. 2010, V1.0
Chapter 6 - Linking To