The Hardware Protection Device (Dongle & Usb Key-Pro) - ICP DAS USA VP-2117 Getting Started

ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
To begin the ISaGRAF 3.x software program, click on the Windows Start button,
then on Programs , and you should see the ISaGRAF program group as illustrated
below. You could click Projects to start the program.
2.1.1 The hardware protection device (dongle & USB Key-Pro)
You must install the hardware protection device (dongle) provided with the
ISaGRAF software on your computers parallel port to for the ISaGRAF program to
achieve fully authorized functionality. (ISaGRAF-32-E & ISaGRAF-32-C DO NOT
need dongle or USB Key-Pro.)
2.
While using ISaGRAF and the dongle is plugged well, if the Help – About says
Maximum number of IO variables: 32 , it means ISaGRAF workbench cannot find
the dongle well. Please reset your PC and then check the Help – About again. If
it still displays Maximum number of IO variables: 32 , the driver may not be
installed well. Please do the following steps.
Dongle Protection:
Please execute the ISaGRAF CD_ROM \Sentinel5382\setup.exe for ISaGRAF-80
or \Sentinel\setup.exe for other ISaGRAF version and then reset the PC again.
USB Key-Pro Protection:
1. To make your PC recognize the ISaGRAF USB protection-key, please un-plug
the USB protection-key from your USB port first, then run
\Sentinel\SSD5411-32bit.exe in the ISaGRAF 3.55 CD-ROM (or later version)
after you have installed the ISaGRAF. Then please reset your PC.
2. To run ISaGRAF Ver. 3.5x, please always plug the USB protection-key in the
PC‟s USB port.
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
VP-2117 Getting Started, Apr. 2010, V1.0
1.
2-2