Table of Contents
Advertisement
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
3.7
Connecting PC to the VP-2117 Ethernet Port
The VP-2117 controller systems feature a built-in Ethernet Port. You can use
Ethernet to connect with the PC. Before you can download an ISaGRAF application
to the VP-2117 controller via Ethernet, you must correctly setup the communication
parameters of Ethernet. (Please refer to
Section 3.9
to setup IP, Mask and Gateway
address)
On your PC:
Please open an ISaGRAF project and select the program you want to download to
the VP-2117 controller, and then press the Link Setup button on the project
screen as shown below.
A PC-PLC Link Parameters dialog box will appear as shown below. From here,
please enter the NET-ID and select the Ethernet communication options then click
on the Setup button.
1
3
2
Once you have clicked on the Setup button, an Ethernet Link Parameters dialog
box will appear. Set the Port Number to 502 and enter the IP address of the
VP-2117 controller, please refer to
Section
3.9.
3-7
VP-2117 Getting Started, Apr. 2010, V1.0
Advertisement
Table of Contents
