Update Vp-2117"S Hardware Driver - ICP DAS USA VP-2117 Getting Started

ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
3.10 Update VP-2117's Hardware Driver
Our newly released driver can also be obtained from the below website:
www.icpdas.com
http://www.icpdas.com/products/PAC/i-8000/isagraf-link.htm
(Please extract the zip file)
To Know the Current Driver Version
1. Create a file folder named vp2k in your hard drive. (Ex. c:\vp2k )
2. Copy napdos\isagraf\vp2k\driver\1.xx\
 7188xw.exe,  7188xw.f4, 7188xw.ini,  vp_20090612.img,
 AUTOEXEC.BAT,  ISA_VP.EXE,  isa_data.exe from the CD_ROM into
your vp2k folder.
3. Run \vp2k\7188xw.exe in your hard drive. A 7188xw screen will appear
(Press F1 for help).
4. Link COM1 or COM2 of your PC to COM1 of the PAC through a RS-232 cable
(CA-0915). If you use other COM Port (ex.COM5), please modify the first line of
7188xw.ini .
5. Power off the VP-2117, change the DIP switch on the left side of control panel to
Init , and then power it up.
6. If the connection is OK, the VP-2111> message will appear on the 7188xw
screen. (If you run 7188xw after the PAC power on, please press Enter on
keyboard to start the setup).
7. Type ver to see the current OS version & date.
8. Type isa_ip *p= to see the current driver version No. & setting of the PAC.
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
> Products > Software > ISaGRAF > Driver or
VP-2117 Getting Started, Apr. 2010, V1.0
3-12