ICP DAS USA VP-2117 Getting Started page 75

ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
Features
Hot Swap
The RU-87Pn doesn‟t need to shut down its power to replace or plug I-87K I/O
modules. Therefore, the whole system can keep operating without any
interruption.
Auto-Configuration
Configurations of I-87K I/O modules can be pre configured and stored in the
nonvolatile memory of the RU-87Pn. When the RU-87Pn is power on or an
I-87K I/O module is plug in, the RU-87Pn automatically check and restore
these configurations to each I-87K I/O modules on it.
Easy Duplicate System
Using the DCON Utility, you can easily make a backup of the I-87K module
configurations and write to another RU-87Pn. This design can easily and
quickly duplicate many RU-87Pn.
Easy Maintenance and Diagnostic
The basic configurations (includes station number, baud rate) are set by the
rotary and DIP switch. The operator can use only one screwdriver to set the
RU-87Pn. And there are several LED status indicators to show whether I-87K
modules are configured and work properly.
If one I-87K module is damaged, the operator just need to get one good I-87K
module with the same item number to replace the damaged one. And then
check the LED indicators to know whether the replacement is performed
correctly. The switch and LED design makes it easy for maintenance. There is
no PC and Notebook needed.
Fully Software Support
The variant development kits and free charge software utility:
 DCON Utility: for configuration
 OPC Servers
 EZ Data Logger
 Support Variant Software Develop Toolkits
Free DLL, ActiveX, Labview driver, Indusoft driver, DasyLab driver, Linux
driver
 ISaGRAF PACs can connect to the RU-87Pn directly
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
VP-2117 Getting Started, Apr. 2010, V1.0 7