ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
When you click on the Simulate tool button three windows will appear. The
windows are the ISaGRAF Debugger , the ISaGRAF Debug Programs , and the
I/O Simulator windows. If the I/O variable names DO NOT show on the simulator
window, just click on menubar - Options > Variable Names to show the variable
names
In the ISaGRAF Debug Programs window, double click on the LD1 to open up
the ISaGRAF Quick LD Program window as below and you can see the LD
program you have created.
Running the Simulation Program
You can click on the variable name to change its value and status. In this example,
''LCD_STR'' is to show the string on the VP-2117's LCD, so the return value
(LCQ_Q) in the simulation process
is 0.
You can close the Debugger
window to exit the simulation.
4-17
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
VP-2117 Getting Started, Apr. 2010, V1.0
Click "X" to the end
of the simulation
Click on "x" to exit
the simulation