Launching An Application Automatically - Intermec CN4 User Manual

HKEY_CURRENT_USER\Software\iConnect2\IConnect\Settings\ShowFTPMenu
HKEY_CURRENT_USER\Software\iConnect2\IConnect\Settings\FtpAutoStart
HKEY_CURRENT_USER\Software\iConnect2\IConnect\Settings\FtpHeartbeat

Launching An Application Automatically

CN4 Mobile Computer User's Manual
To enable the FTP menu
Create this DWORD registry key and set it to a value of 1:
•
The iFTP menu is available the next time you start iConnect.
To manage the state of the FTP server
• Modify these existing registry keys:
where 1 = enable and 0 = disable.
There are two ways to automatically launch your application when
you perform a reset on the computer:
• Make sure your .cab file places a shortcut to your application in
the \Windows\StartUp folder.
• Configure the AutoRun program to launch your application.
The computer contains a program called AutoRun.exe which
automates operations such as launching other processes. You can
configure AutoRun.exe through the AutoRun data file, AutoRun.dat.
For compatibility with other Intermec computers, you can place a
copy of AutoRun.exe in the same folder as your AutoRun.dat file but
it is not required.
To create and install the AutoRun.dat file on your computer
1 Create a folder called System on your CN4.
2 Open the Notepad application on your PC.
3 Write commands for AutoRun.dat using the supported AutoRun
script commands.
4 Save the Notepad file as AutoRun.dat.
5 Copy the AutoRun.dat file to the System folder on the CN4.
During every boot, the system scans for AutoRun.dat in the
System folder.
Chapter 3 — Developing and Installing Applications
73