Wlan Section - Intermec EasyCoder PF2i User Manual

TRAP_TNAME
TRAPADDR
TRAPPORT
.TSIG_KEY
.TSIG_KEYNAME
WINS_ADDR1
WINS_ADDR2
.WRT_COM
Example:
SETUP "lan1","RTEL_PR1","9100"

wlan Section

Objects starting with a dot (.) cannot be read if the current user does not
have rights to read/set protected wlan settings.
Objects
SSID
WEP 1-4
.WEP_KEY
AUTH
WPA
WPA_PSK
ROAM
CHANNEL
EasyLAN User's Guide
Chapter 6 — Advanced Confi guration
Friendly trap names.
Trap Address. Th is is the IP address of the
receiver of SNMP Traps.
SNMP Trap port. Default port to send
SNMP Traps.
TSIG key (for DDNS with TSIG)
Name of the TSIG encryption key.
Primary WINS Server.
Secondary WINS Server.
Write Community. Community with rights
to read and write SNMP MIBs.
Description
Service Set Identifi er (0-32 characters).
WEP keys 1 to 4 (alphanumerical or
hexadecimal).
Select WEP key (0 disables WEP; 1-4 selects
transmission key).
Set the network authentication subtype to
Shared or Open.
Set the status of WPA to "on" or "off ".
Set or remove the Pre-Shared Key (PSK).
Set the network adapter's roaming
inclination (1-3, a high value will make the
adapter less inclined to switch access points)
Read current channel.
75