Intermec EasyCoder PF2i User Manual page 88

Chapter 6 — Advanced Confi guration
.READ_COM
RTEL_PR1
SMTP_ADDR
SNMP_AUT
SMTP_INP
SMTP_PORT
SYS_CONT
SYS_LOC
SYS_NAME
.TCT_LIMIT1
.TCT_UNIT1
TESTMAIL
TIMESERVER
TRAP_COM
TRAP_ENABLE
74
Read Community. Community with rights
to read the SNMP MIBs.
net1: TCP Port Number. Th e default port
number for raw TCP.
E-mail (SMTP) server.
Authentifi cation Failure Trap, enabled/dis-
abled.
Settings for SMTP Server (Manual or
DHCP).
E-mail (SMTP) port (default 25).
System Contact (printer administrator)
(optional).
System (printer) location (optional).
SNMP Name. Administrative name for the
SNMP Node.
Th e variable to set the Odometer Count1
limit. Defi nes when an odometer count1
alert message shall be sent.
Th ermal Counter Unit. Th is object is used
to set the unit of measurement to either
forms (labels) or meters for the Odometer
Counter. Th is object is used in combination
with the .TCT_LIMIT1 object and the
odometer count 1 alert.
Submit test e-mail. When this variable is set
to yes, a test e-mail is generated and sent to
the default address. After the e-mail is sent,
the variable reverts back to default (no).
Timeserver host name (for DDNS with
TSIG)
Trap Community. Th is defi nes what
community the SNMP Traps should be sent
to.
Trap status (enable, disable, delete).
EasyLAN User's Guide