Web Shell (Fingerprint Only) - Intermec EasyCoder PF2i User Manual

Web Shell (Fingerprint only)

Click Web Shell to view and change a variety of test and default settings.
Web Shell Screen in EasyLAN Web Browser Interface
For more information on Web Shell settings, see the next table.
Web Shell Settings
Setting
Testfeed [value]
Ribbon Sensor
[value]
Paper Sensor
[value]
Default Setup
Reboot
Print Test Label
EasyLAN User's Guide
Chapter 4 — Using the EasyLAN Web Browser Interface
Description
Label Stop Sensor calibration and testfeed. Th is is equivalent to
issuing the TESTFEED command on the printer.
Calibration of the Ribbon Sensor. Th is will also be calibrated by
the testfeed. Only shown if the sensor is installed.
Calibration of the Paper Sensor (EasyCoder PM4i option; PX4/6i
standard). Th e paper sensor will also be calibrated by a testfeed.
Only shown if the sensor is installed.
Revert back to factory default printer settings (Reverts all
confi gurations that can be done by using the EasyCoder internal
keyboard) by setting the PRT section to default. Passwords, alerts,
and selected application are not changed.
Reboots the printer.
Prints predefi ned test patterns.
37