Snmp; Setting Up The Printer For Snmp; System Requirements For Snmp; Adding Intermec Mibs To Nms Software - Intermec EasyCoder PF2i User Manual

SNMP

Setting up the Printer for SNMP

For information about SNMP printer settings, see "SNMP" on page 43.

System Requirements for SNMP

Th e following requirements must be fulfi lled in order to make full use of
the EasyLAN SNMP support:
- NMS software that allows you to install private enterprise MIBs.

Adding Intermec MIBs to NMS Software

1 Copy the Intermec MIB fi les from the CD that came with the
EasyLAN interface card to the NMS host.
intermec.mib
itcnetwork.mib
itcports.mib
itcsnmp.mib
printer-tc.mib
prtcmmn.mib
prtitp.mib
2 Install the MIBs according to instructions in your NMS software
documentation. For technical details, you can view a MIB fi le with
any text editor.

Using Odometer Count1

Th e printer keeps track of used forms (labels or tickets) and printed
distance. Th is is modeled in bcpTh ermalCounterTable, where there is a
unit (forms or meter), a current value, and a limit.
You can use the Odometer Count1 for maintenance purposes, for
alerting when the label stock is close to running out, or when the
thermal print head should be exchanged.
Examples:
On a roll there are 500 labels, set "limit" to 470 and "unit" to forms.
EasyLAN User's Guide
MIB module top tree defi ning objects in Intermec
products
TCP/IP and WINS settings
Communication ports settings
SNMP communities and trap destinations
Textual conventions
Printer-specifi c items regarding system, media,
memory, print mechanism, etc.
Programming language version.
Chapter 6 — Advanced Confi guration
87