Printing A Label File - Intermec EasyCoder PF2i User Manual

Chapter 5 — Basic Operations (Fingerprint and IPL)

Printing a Label File

Use the following instructions to print a sample of the label described on
the previous page.
You will need to know the name or IP address of the printer you want
to print to. Make sure that the printer is set to use "net1:" or "auto" as
standard IN channel.
1 Start an FTP application connected to the printer:
ftp xxx.xxx.xxx.xxx
2 Log on using the user account name and password.
3 Send the test fi le to the printer. For example:
put dptest.txt pr1
4 If the printing has been successful, the application returns "transfer
complete" and other information.
Th e printed label should look similar to the label below:
60 EasyLAN User's Guide