Password Protection; Default Settings; Forgotten Passwords - Intermec EasyCoder PF2i User Manual

Chapter 5 — Basic Operations (Fingerprint and IPL)

Password Protection

Network users can easily access and change the network and printer
settings by entering the printer web pages. Intermec therefore strongly
suggests that you change the default password settings and thereby limit
the access possibilities and hazard of unauthorized changes of the printer
settings. Password changes are made through the internal web interface
(see "Confi guration" in Chapter 4).
Passwords are case sensitive and stored using encryption.

Default Settings

Th e factory default password settings are:
Account Password
User No Password
Admin Pass

Forgotten Passwords

A password that has been set and forgotten is not possible to retrieve in
any way. If the default password for the admin account is changed and
forgotten, you will need a Compact Flash card to revert the printer to the
default settings. Please contact your local Intermec dealer for support.
64 EasyLAN User's Guide