Intermec EasyCoder PF2i User Manual page 62

Chapter 4 — Using the EasyLAN Web Browser Interface
TCP/IP Settings
Setting
IP Selection
48
Description
Method by which an IP address will be assigned to the printer.
Choose DHCP, BOOTP, DHCP+BOOTP, or MANUAL.
If you choose DHCP, BOOTP, or DHCP+BOOTP, the cur-
rently assigned network values appear in the entry fi elds.
If you choose MANUAL, you need to enter network informa-
tion in the entry fi elds as follows:
• IP Address: Manually assigned IP address for the printer.
• Netmask: Manually assigned netmask for the printer.
• Default router: IP address of the default router.
• Nameserver: Manually assigned name server address. Th is
fi eld must be set to use names instead of IP addresses when
setting up Email communication.
• Primary and Secondary WINS Server: IP address of pri-
mary and secondary WINS servers. If you chose DHCP or
BOOTP as the IP Selection method, the currently assigned
WINS IP addresses may appear here depending on how your
DHCP server is confi gured.
• net1 TCP Port Number: Port number for raw TCP. Th e
default is 9100.
EasyLAN User's Guide