Inserting A Computer In The Terminal Holder - Intermec 6820 User Manual

Chapter 2 — Installing the 6820 Printer

Inserting a Computer in the Terminal Holder

16
Note: If your paper has a preprinted logo on every page, make sure
the printhead is below the preprinted logo. If not, you can adjust
the position of the paper, either by pressing the Line Feed button,
or by using the green thumbwheel.
3 Once the paper is properly positioned, press the Set Page button
to clear the Paper Out light and indicate where the top of the page
is located.
4 Close the printer lid. Make sure the paper passes through the
paper slot when the printer begins to print.
Note: When removing the computer, do not press the computer keys
against the terminal slide retainer. Always store the computer in the
terminal holder.
The fixed mount or portable printers have terminal holder options
for the 700 Series, CK61, CN3 Series, CN4 Series, CN70, and CN70e
mobile computers.
To insert a mobile computer in the terminal holder
1 Insert the top of the computer into the terminal slide retainer.
2 Use the computer to push the terminal slide all the way in the
direction shown.
3 Lower the connector end of the computer into the terminal
holder.
4 Slide the computer to fully seat it in the docking connector.
6820 Series 80-Column Printer User Manual