Configure Bluetooth Communications Using Printset; Connect To A Bluetooth Scanner By Reading A Bar Code; Connect To A Bluetooth Mobile Computer - Intermec PR2 User Manual

Chapter 2 — Connect and Configure the Printer

Configure Bluetooth Communications Using PrintSet

Connect to a Bluetooth Scanner by Reading a Bar Code

Connect to a Bluetooth Mobile Computer

20
You connect your printer to a desktop PC through a USB connection
and use PrintSet 5.2 or later to configure Bluetooth communications.
Note: The first time you create a USB connection to a desktop PC, you
must use Intermec InterDriver to install the appropriate driver
software on your PC.
1 Connect your printer to a desktop PC with a USB cable.
2 Download and install Intermec PrintSet 5.2 or later from the
Intermec website at www.intermec.com.
3 Use PrintSet to add your printer to PrintSet and configure
Bluetooth communications.
The easiest way to connect a Bluetooth-enabled bar code scanner to
your printer is to use the scanner to read the Bluetooth Device Address
(BDA) bar code label on the bottom of your printer.
Note: If the bar code is not readable, you can use the Intermec
EasySet™ Configuration Utility to create a scannable bar code from
your printer BDA. The BDA is included in the Bluetooth
Configuration section of the test label.
1 Turn on your printer.
2 Turn on your Bluetooth scanner, and make sure that it is
discoverable and within range of the printer.
3 Use the scanner to read the BDA bar code label on the bottom of
your printer. The printer attempts to connect to the scanner.
To connect to the printer from a Bluetooth-enabled mobile computer,
you may need to configure Bluetooth settings on the printer.
1 Turn on your printer.
2 Turn on your mobile computer.
PR2 and PR3 Mobile Receipt Printer User Manual