Intermec Trakker Antares 2415 Programmer's Manual page 89

Native Terminal Emulation Programmer's Guide
S 3) Terminal ID
This enables the entry of a character string sent back to the host in
response to IAC SB terminal type SE. The range is 0 through 30,
with null string as the default. If set to null, then ANSI, VT100,
VT220, VT320, or VT340 is returned as selected.
Terminal ID
Terminal Type
S 4) Auto Wrap
If enabled, graphic display characters received when the cursor is at
the right margin appear on the next line. The screen scrolls up if the
cursor is at the end of the scrolling region.
If disabled (default), graphic characters received when the cursor is at
the right margin replace previously displayed characters.
—
Chapter 3 Using the Terminal Emulation Menus
69