Converters (59Xx); Memory View (6400, 5055, 17Xx, 11Xx) - Intermec Trakker Antares 2415 Programmer's Manual

Native Terminal Emulation Programmer's Guide
4) Keyboard Test (6400, 5055, 59XX, 17XX, 11XX)
Tests each key on the terminal keypad or 5055 external keyboard. Press
each key, except the [Enter] key, and a character corresponding to the
pressed key should appear on the display.
Keyboard Test
Press A Key
ENTER To Exit
Key =
'A'
5) Scanner Test
This option tests the operation of an attached bar code scanner. From this
menu, scan an enabled bar code. The bar code and the bar code length
should appear on the display to pass. Press [Enter] to exit the test.
Scanner Test
Scan Code>
Length>

2) Converters (59XX)

Use this option to test the analog-to-digital (A to D) and the digital-to-
analog (D to A) converters. The RSSI Test (not available on all radios) of-
fers a choice of graphics displays of the received radio signals. Press any key
to exit.
Converters
1) A to D
2) D to A
3)

3) Memory View (6400, 5055, 17XX, 11XX)

This menu is reserved for engineering test and evaluation. Press [F1] to
exit out of this test, [F2] to view the heap, [F3] to view the far heap, or
[F4] to do a memory dump.
Memory View
F1 - Exit
F2 - Heap
F3 - Far Heap
F4 - Memory Dump
Address: xxxxxx
—
Chapter 3 Using the Terminal Emulation Menus
91