Intermec CN2A User Manual page 137

CN2A Mobile Computer User's Manual
Chapter 5 — Troubleshooting and Maintaining the CN2A
Reset
button
Do not use force or a sharp object when pressing the Reset
button. You may damage the Reset button.
3 Insert the battery. For help, see "Installing and Charging the
Battery" on page 6.
4 When the Bootloader Menu appears, release the 8 or D key.
5 Install the battery door.
6 Place the CN2A in a dock connected to external power.
Note: The upgrade will fail if the CN2A is not connected to
external power. For help, see the accessories list in "Accessories
for the CN2A" on page 130.
7 Select Update Bootloader + OS and press Enter.
Messages about the upgrade status appear at the bottom of the
screen. The "Need Reboot" message appears and Cold Boot
is selected.
8 Press Enter. The CN2A cold boots.
9 If you are prompted to recalibrate the touch panel, tap the
screen as prompted.
10 The Refreshing File System status box appears. The message
"Copying files from SD to DoC" appears. When the CN2A
has finished copying files, it clears the registry and cold boots
automatically.
121