Changing The Default Ftp User Name And Password - Intermec CN2A User Manual

Changing the Default FTP User Name and Password

CN2A Mobile Computer User's Manual
Chapter 3 — Adding the CN2A to the Network
The default FTP user name is
password is
cr52401
password and create an access control list that specifies which
users can use the FTP Server.
To change the default FTP user name and password
1 Edit the registry to set this parameter:
;disable default intermec account
[HKEY_LOCAL_MACHINE\Software\Intermec\IFTP]
"UseDefaultPW"=dword:00000000
Note: You can run the Microsoft eMbedded Visual C++
Remote Registry Editor on your PC, using ActiveSync to
connect to the CN2A. Or you can download and run a third-
party registry editing program on your CN2A.
2 Create an access control list called FTPDCE.TXT using this
format:
FTPDCE:user1!password1<cr><lf>user2!password2<cr
><lf>user3!password3<cr><lf>...
Where user# and password# are the case-sensitive user names
and passwords, separated by an exclamation point (!).
3 Copy FTPDCE.TXT to the \Windows directory on the
CN2A, which is where the FTPDCE.EXE server is located.
4 Stop and start the FTP Server. This forces the FTP Server to
encrypt the access control list, create a hidden, encrypted file
called FTPDCE.DAT, and then delete FTPDCE.TXT.
Follow these steps to stop and start the FTP Server:
a Go to Start > Settings > Control Panel.
b Double-tap the Utilities icon to open the Settings screen.
c Uncheck the Enable FTP Service check box.
d Tap OK to save the change and exit the Setting screen.
e Double-tap the Utilities icon to open the Settings screen.
f Tap the FTP Service tab to bring the tab forward.
and the default
Intermec
. You can disable the default user name and
©
73