Using The Control Panel To Customize The Keypad - Intermec CN2A User Manual

Chapter 2 — Configuring the CN2A

Using the Control Panel to Customize the Keypad

40
• You can disable the Power button so users cannot turn off the
CN2A. This may be useful if you have installed the CN2A in
a kiosk environment.
There are three ways to customize the CN2A keypad:
• You can use the Control Panel on your CN2A to configure
keyboard options. For help, see the next section, "Using the
Control Panel to Customize the Keypad."
• You can use a registry editing program to change the keypad
registry entries. For help, see "Using a Registry Editing
Program to Customize the Keypad" on page 41.
• You can write an application to change the keypad registry
entries. For help, see "Writing an Application to Customize
the Keypad" on page 42. If you have many CN2As to
customize, this may be the most convenient method.
You can customize the keypad on a CN2A by making selections
at the Keyboard Properties screen, which you access through the
Control Panel.
To customize the keypad using the Control Panel
1 Go to Start > Settings > Control Panel.
2 Double-tap the Keyboard icon. The Keyboard Properties
screen appears.
3 Tap the Options tab.
4 Check the box for each
option you want to enable.
For help, see the "Summary
of Options" table on
page 41.
5 Click OK to save your
changes and exit the
Keyboard Properties screen.
6 Tap X to exit the Control
Panel. The changes take
effect immediately. You do
not need to warm boot the
CN2A.
CN2A Mobile Computer User's Manual