Installing And Charging The Battery - Intermec CN2A User Manual

Chapter 1 — Using the CN2A Mobile Computer

Installing and Charging the Battery

6
Several factors determine the life of your battery, such as extreme
temperatures and your usage.
Make sure you fully charge the battery before you use your
CN2A. To charge the battery, you need to install it in the CN2A
and place the CN2A in a dock connected to external power.
To install and charge the battery
1 Push down on the battery door latch, and pull up on the
battery door.
2 Remove the battery door and set it aside.
3 Align the battery contacts, and insert the battery in the
battery compartment. Press down on the battery until it clicks
into place.
4 Replace the battery door.
Battery
CN2A Mobile Computer User's Manual