Intermec CN2A User Manual page 125

Summary of Intermec Diagnostic Tests
Test Name Description
1. Backlight Verifies that the backlight is
Test working properly by turning it
off, on, and testing each dim
level.
2. Battery Displays the charge levels for the
Information main battery and the backup
battery. Also indicates if AC
power is detected.
3. Display Verifies that every pixel on the
Test CN2A screen is working properly.
4. Hardware Reads, verifies, and displays
Configuration information about the hardware
configuration. Also displays the
version of the operating system
(OS) running on your CN2A.
5. Memory Displays information about the
Information RAM, which is divided into
program memory and storage
memory.
6. Networking Displays your IP address and
Test MAC address, and validates your
network connection.
7. Audio Test Verifies that the audio sounds are
working correctly.
8. Touch Screen Verifies that the touch screen is
Test working correctly.
9. LED Test Verifies that the LED is working
correctly.
10. Keypad Verifies that each key is working
Test correctly.
CN2A Mobile Computer User's Manual
Chapter 5 — Troubleshooting and Maintaining the CN2A
Tips
When you start the Backlight Power
Control test, the backlight turns off.
Tap near the top of the screen to turn the
backlight on again so you can indicate if
the test passed or failed.
Tap X to exit the test.
When each test action begins, a message
explains what you should see on this test
display.
Press Enter or tap X to dismiss each
message. Press Enter or tap the screen you
finish examining each test display.
You may be asked to provide this
information if you contact Intermec
Product Support.
Tap X to exit the test.
Tap X to exit the test.
Tap X to exit the test.
Tap X to exit the test.
A message directs you to draw on the
screen with the stylus. Tap X to dismiss
the message, and a white screen appears
for you to draw on. When you finish
drawing, press any key to exit. If the
message appears again, tap X at the top of
the screen to exit the test.
Tap X to exit the test.
Tap X to exit the test.
109