Intermec CN2A User Manual page 124

Chapter 5 — Troubleshooting and Maintaining the CN2A
108
4 From the drop-down list, choose which diagnostic test to run.
There are two ways to choose a test:
• You can tap the test.
• You can type the number of the test on the numeric
keypad or the USB keyboard.
For help deciding which tests to run, see the following table,
"Summary of Intermec Diagnostics Tests."
5 When you have finished running tests, press ESC to exit.
Note: You can exit Intermec Diagnostics at any time by pressing
ESC. You may need to press ESC to exit the current test and then
press ESC again to exit Intermec Diagnostics.
CN2A Mobile Computer User's Manual