Using The Smartsystems Console To Upgrade The Cn2A - Intermec CN2A User Manual

Using the SmartSystems Console to Upgrade the CN2A

CN2A Mobile Computer User's Manual
Chapter 5 — Troubleshooting and Maintaining the CN2A
You can use the SmartSystems Console to upgrade your CN2A.
The Console is part of SmartSystems Foundation and is available
from the Intermec Developer Library on the Intermec web site.
To upgrade a CN2A using the SmartSystems Console
1 Install SmartSystems Foundation on your PC. To download
SmartSystems Foundation, go to www.intermec.com/idl and
open the Device Management page.
2 Open the Console.
3 Make sure the Console and the CN2As are on the same
subnet.
4 Make sure your CN2A is in either a USB client dock or
modem dock connected to external power.
5 Make sure you have downloaded the upgrade .exe file to your
desktop PC, as described in "Downloading the Upgrade .exe
File to Your PC" on page 114.
6 Double-click the upgrade .exe file on your desktop PC. An
InstallShield application starts. This application guides you
through the process of extracting the upgrade files to the
default location on your PC.
Note: Steps 7 through 10 of this procedure do not describe
every InstallShield screen. Instead, these steps describe only
the important decision points.
7 If you have already downloaded this upgrade.exe file to this
PC, the InstallShield Welcome screen prompts you to modify,
repair, or remove the InstallShield application. Choose either
Modify or Remove.
If you choose Remove, the InstallShield application is deleted
from your PC, and you must double-click the upgrade .exe
file to start the InstallShield application again.
8 If you see the message, "Do you want to copy the files directly
to your SD Card?" this indicates that SmartSystems is not
installed on your PC.
115