Booting The Cn2A; Warm Booting The Cn2A - Intermec CN2A User Manual

Booting the CN2A

Warm Booting the CN2A

CN2A Mobile Computer User's Manual
Chapter 5 — Troubleshooting and Maintaining the CN2A
You seldom need to warm or cold boot the CN2A. The CN2A
uses the configuration currently saved in flash memory during
the boot process.
You need to boot the CN2A when an application is locked up
and will not respond, when you upgrade the firmware, or when
you reflash the computer. The next instructions explain how you
warm and cold boot the CN2A.
If your charged CN2A does not resume after pressing the Power
key, or if the computer or an application is locked up, you may
need to warm boot it.
You can warm boot the CN2A using the Warm Boot button or
the Power key.
To warm boot the CN2A using the Warm Boot button
• Using the end of the stylus, press the Warm Boot button
inside of the stylus holder.
Wa
Boo
but
The screen goes blank immediately. The screen remains blank
for a few seconds, the Refreshing the File System dialog box
appears, and the CN2A warm boots.
111