Understanding The Beeps - Intermec CN2A User Manual

Chapter 1 — Using the CN2A Mobile Computer

Understanding the Beeps

18
Understanding the CN2A Status Lights
Light Color
Good Read Green
Red
Battery Green
Orange
Red
The CN2A uses beeps to provide you with audio feedback when
it performs some functions. For example, you hear a beep each
time you scan a valid bar code.
Understanding the CN2A Beeps
Beep Sequence
High beep, low beep
Error beep (3 rapid
beeps)
Click
You can change the beeper volume for your needs and
environment. You can set the beeper volume to Off, Low (quiet),
Medium (medium), High (loud), and Very high (very loud).
The default setting is Very high.
Description
This light turns on when the CN2A
successfully decodes a bar code.
This light turns on when you press one of
the Side Scan buttons or the Scan button
on the scroll keypad.
When the CN2A is connected to a power
source, this light turns on to indicate that
the battery is fully charged.
When the CN2A is connected to a power
source, this light turns on if you cannot
charge the battery. The temperature may
not be within the charging range, or the
battery may be damaged.
When the CN2A is connected to a power
source, this light turns on to indicate that
the battery is charging.
What It Means
You entered valid data or a valid command, or
the CN2A decoded a bar code label.
You entered or scanned an invalid command.
Try entering or scanning the command again.
You pressed a key.
CN2A Mobile Computer User's Manual