Table of Contents
Advertisement
2.6.2 Installing the External Fan Module
The IPC972 supports either an internal fan module or an optional external fan module. The
procedure of installing the fan module into system is illustrated below.
Step 1
Turn off the system.
Step 2
Disconnect the power connector.
Step 3
Loosen 7 screws to remove the side cover from the chassis, then remove the
internal fan module.
Step 4 Take the fan module and its screws from the accessory box.
Step 5 Screw the fan module to the system chassis and plug the fan cable to the fan
connector on the riser.
Hardware Installation
IPC972 Series User's Manual
45
Advertisement
Table of Contents
Need help?
Do you have a question about the IPC972 and is the answer not in the manual?
Questions and answers