Installing The Wi-Fi Module - AXIOMTEK IPC972 User Manual

Step 5 Apply thermal grease on top of the CPU
Step 6 After installing all components, close the heatsink cover and expansion cover back
to the chassis and fasten all screws.
2.2

Installing the Wi-Fi Module

The IPC972 comes with a Mini card slot and a M.2 Key E 2230 socket for users to install a
wireless LAN card. Please refer to the following instructions and illustrations for the installation
of the wireless LAN.
Step 1 Turn off the system.
Step 2 Disconnect the power connector.
Step 3 Loosen 4 screws to remove the expansion cover(2) from the chassis.
step 4 Insert the wireless LAN card into the mini card slot (1) or M.2 key socket (2)
and push it down firmly. Then screw the card tightly to the mainboard.
Hardware Installation
IPC972 Series User's Manual
35