Table of Contents
Advertisement
IPC972 Series User's Manual
Step 2
Align the connector of the SSD/HDD with the SATA slot on the main board. Then
insert the SSD/HDD into the SSD/HDD bay.
Step 3
The external SSD/HDD installation complete.
Note: When using 7mm height HDD/SDD, please take the HDD spacer out of the
accessory box and follow the steps below to stick it on HDD/SSD.
→
Note: The description of the 2.5" HDD Tray is as shown below.
2.5.2
Installing SSD/HDD and NVMe SSD
Step 1
Open the SSD/HDD & NVMe SSD cover on the bottom side of the IPC972.
40
→
→
→
→
→
Hardware Installation
Advertisement
Table of Contents
Need help?
Do you have a question about the IPC972 and is the answer not in the manual?
Questions and answers