Troubleshooting; Troubleshooting Tips - Intermec 6200 Troubleshooting Manual

" " " " " " "
This section offers some troubleshooting tips, instructs how to clear out the
computer's RAM drive, Master-Mode Boot the computer, check the com-
puter's Flash version, and adjust contrast and backlight settings.

Troubleshooting Tips

Table 4-1 lists possible conditions and offers some basic remedies:
Problem
Screen is Blank
Computer Locks Up
" " " " " " "
Table 4-1

Troubleshooting

Possible Cause
Computer in sleep (suspend)
mode.
Main battery or backup battery
low.
LCD screen too dark or light
(beep is heard when key
pressed)
6200 and 6210 Hand-Held Computers Troubleshooting Guide 4-1
Troubleshooting
" " " " " " "
Solution
Press [ON] key to wake up
computer.
Attach computer to good
charge source, operation
should resume. Look at
"When ON Key Pressed,
Computer Beeps Once" or
"When ON Key Pressed,
Computer Beeps Twice" for
other solutions.
Adjust brightness and contrast
settings. See last page for
instructions.
Section 4
" " " " " " "