Lcd Panel - ABB PowerValue 11 RT G2 User Manual

4 O P E R AT I O N
—

4 .5 LCD Panel

Rack Display
Battery Info
—
Table 7: Symbols in operating mode
Display
UPS Display Info
Load Info
Mode Operation Info
Function
Indicates the estimated or running autonomy time.
H: hours, M: minute.
Indicates that the configuration items, and the configuration items are listed in the detail in
the section UPS Setting.
Indicates that the warning and fault codes, and the codes are listed in the detail in the section
Faults Reference Code and Warning indicator.
Indicates that the UPS alarm is disabled.
Indicate the input voltage, input frequency, battery voltage, battery current, battery capacity,
output voltage, output frequency, load current and load percent.
k: kilo, W: watt, V: voltage, A: ampere, %: percent, Hz: frequency.
Indicates the load level by 0-24%, 25-49%, 50-74% and 75-100%.
Indicates an overload.
Indicates that the programmable management outlets are working.
Indicates that the UPS connects to the mains.
Indicates that the battery is working.
Indicates that the bypass circuit is working.
Indicates that the ECO mode is enabled.
Indicates that the AC to DC circuit is working.
Indicates that the inverter circuit is working.
Indicates that the output is working.
Indicates the battery level by 0-24%, 25-49%, 50-74%, and 75-100%.
Indicates a low battery.
Tower Display
Load Info
UPS Display Info
Battery Info
21
Mode Operation Info