Lcd Panel - ABB PowerValue 11 RT G2 User Manual

20 A B B U P S P R O D U C T S A N D S O L U T I O N S
—

4 .5 LCD panel

Rack display
Battery Info
—
Table 6: Symbols in operating mode
Display
H
M
UPS Display Info
VAC
H %
z
VDC
H
M
Load Info
Mode Operation Info
Function
Indicates the remaining backup time in pie chart.
Indicates the remaining backup time in numbers.
H: hours, M: minute, S: second
Indicates warning and fault.
Indicates the warning and fault code. Code details are listed in section 3.5.
Indicates that the UPS alarm is disabled.
Indicates the input voltage, frequency, output voltage, battery voltage, output current,
battery capacity, load percent, output power, positive bus voltage, negative bus voltage,
VAC
H %
z
temperature, output receptacle 1, output receptacle 2.
VDC
Indicates the load level: 0-25%, 26-50%, 51-75%, and 76-100%.
Indicates overload.
Indicates the UPS is connected to the mains.
Indicates the battery is working.
Indicates the bypass circuit is working.
Indicates the ECO mode is enabled.
Indicates the Inverter circuit is working.
Indicates the output is working.
Indicates the battery level: 0-25%, 26-50%, 51-75%, and 76-100%.
Indicates low battery level and low battery voltage.
Indicates UPS is in settings mode.
Tower display
Battery Info
H
M
Mode Operation Info
Load Info
VAC
UPS Display Info
H %
z
VDC