Toshiba GR200 Series Instruction Manual page 1388

RBRF class
Attribute Name Attr. Type Explanation
LNName
Data
Common Logical Node Information
OpCntRs INC
Status Information
Str ACD_ABC Start, timer running
OpEx ACT
OpIn ACT_ABC Operate, retrip ("internal trip")
Setting
FailMod ING
FailTmms ING
SPlTrTmms ING
TPTrTmms ING
DetValA ASG
ReTrMod ING
Condition C: At least one of either data shall be used depending on the applied tripping schema.
RFLO class
Attribute Name Attr. Type Explanation
LNName
Data
Common Logical Node Information
OpCntRs INC
Measured values
FltZ CMV
FltDiskm MV
Status Information
FltLoop INS
Setting
LinLenKm ASG
R1 ASG
X1 ASG
R0 ASG
X0 ASG
Z1Mod ASG
Z1Ang ASG
Z0Mod ASG
Z0Ang ASG
Rm0 ASG
Xm0 ASG
Zm0Mod ASG
Zm0Ang ASG
Shall be inherited from Logical-Node Class (see IEC 61850-7-2)
LN shall inherit all Mandatory Data from Common Logical Node Class
Resetable operation counter
Breaker failure trip ("external trip")
Breaker Failure Detection Mode (current, breaker status, both,
other)
Breaker Failure Time Delay for bus bar trip
Single Pole Retrip Time Delay
Three Pole Retrip Time Delay
Current Detector Value
Retrip Mode
Shall be inherited from Logical-Node Class (see IEC 61850-7-2)
LN shall inherit all Mandatory Data from Common Logical Node Class
Resetable operation counter
Fault Impedance
Fault Distance in km
Fault Loop
Line length in km
Positive-sequence line resistance
Positive-sequence line reactance
Zero-sequence line resistance
Zero-sequence line reactance
Positive-sequence line impedance value
Positive-sequence line impedance angle
Zero-sequence line impedance value
Zero-sequence line impedance angle
Mutual resistance
Mutual reactance
Mutual impedance value
Mutual impedance angle
- 1367 -
6F2S1915 (0.46)
(MICS Ed.1)
T M/O GRZ200
M
O N
O Y
T C N
T C Y
O Y
O Y
O N
O N
O Y
O N
T M/O GRZ200
M
O N
M Y
M Y
O Y
O Y
O Y
O Y
O Y
O Y
O N
O N
O N
O N
O Y
O Y
O N
O N
GRZ200 (Soft 031 & 032)