Toshiba GR200 Series Instruction Manual page 1334

7
- 1 1 - 3 4 H - 0 0 - 6
Note: The user can also change a rated current (In). To change it, see the succeeding
Changing rated current
section
The user is not able to change the system frequency (fn).
Combination of VCT and BIOs
(iii)
The transformer module (VCT) is located at the far right slot (e.g., at 'VC1' in Figure 13.3-3).
Identify the code at Position '7' to know the VCT type (e.g., VCT12B is mounted when Figure
13.3-2 is true).
The user can check the layout of the binary input and output modules (BI, BO, or BIO)
using the ordering codes. For example, the user can read BI3A and BO1A modules, the ordering
cords "4H" at Positions A&B. The user can also know the configuration with IO configuration
label. Additionally, the user can check terminal block types by seeing a code at Positon 'H'.
Ordering positions
8 9 A B C D
VCT type (VCT12B)
System frequency (fn) = 60Hz
AC rating (In) = 5A
Figure 13.3-2 Factory setting example
.
- 1313 -
E F G H J K L
6 - 3 0 - 2 2
0
6F2S1915 (0.46)
GRZ200 (Soft 031 & 032)