Toshiba GR200 Series Instruction Manual page 1333

Unpack and inspection of hardware and software
The user should unpack and check the IED before use. Be in touch with Toshiba at email
(www.toshiba-relays.com) for any issues.
Opening and inspecting relay (IED) package
(i)
Open a relay package and inspect physical damage if any. Ensure that the following items are
included in the package. If there is any noticeable physical damage, or any of the above items
are missing, contact your agent.
- Relay (IED) unit
- Test record:
- Installation guide:
- Instruction manuals:
- Flange covers:
- Function keys label:
- LEDs Label:
- White-plastic-sheets:
†Note: The white ones are provided to lock the flange screws. They are not bundled
when the unit case is in 1/1 size; they are also not bundled for flush-mounting type
case.
Manufacture settings (In, Vn, fn, Vdc)
(ii)
Find the hardware nameplate. The user can know the IED has been produced correctly in
terms of rated current (In), voltage (Vn), frequency (fn), and DC rating (Vdc). The user can
read the same on Factory settings (Figure 13.3-2).
7 8 9
- 1 1 - 3 4 H -
GRZ200
1A / 5A
100-120
TOSHIBA ENERGY SYSTEMS & SOLUTIONS CORPORATION
Figure 13.3-1 Hardware nameplate example on the rear
Ordering positions
A B C D
0 0 -
Distance protection IED
-11-34H-21-66-30-220
50 / 60
110-250
- 1312 -
One report sheet
One guide sheet
Provided within a CD-ROM
Left and right covers
One label sheet
One label sheet
Two sheets†
E F G H
6 6 - 3 0 -
Month, Year
****** ** ***
DC rating (Vdc)
Rated frequency (fn)
Rated voltage (Vn)
Rated current (In)
6F2S1915 (0.46)
J K L
2 2 0
GRZ200 (Soft 031 & 032)