Toshiba GR200 Series Instruction Manual page 1285

Figure 12.4-3 shows the steps required to display the status of the binary inputs and outputs.
Main Menu
10:48 2/9
Record >
_Monitoring >
Setting >
IO setting >
Time >
Test >
Figure 12.4-3 Steps to display Binary I/O status
Communication
(iii)
The "Communication" sub-menu provides several sub-menus as shown in Figure 12.4-4.
Sub-menu
Monitoring
Figure 12.4-4 Menu hierarchy for Communication sub-menu
The display structure for each sub-menu is explained in the following sections:
LAN sub-menu: the communication port name and status are shown in a line.
When the IED has single communication module, or when the IED has
communication modules but a communication module is allowed to operate in
the IED, an operation status of the communication ports is shown, as shown
in Figure 12.4-5.
"LAN" sub-menu can display "PortStatus" and "NetMonitor status". If
"NetMonitor" is running (active), the LCD screen will display a ">"mark.
Monitoring
10:48
►
Statistics
Metering
_Binary I/O
◄
Operation Time
Relay Element
Communication
Slot#1
10:48
BI1 0 CB1 contact
BI2 0 DC power sup.
BI3 0 Trans-T Comm1
BI3 0 Trans-T Comm2
BI4 0 ARC-Block1
BI5 0 Indi. Reset
sub-menu
Communication
- 1264 -
Binary I/O
2/14
10:48
►
>
_Slot#1
>
Slot#2
>
Slot#3
◄
>
Slot#4
>
>
►
Slot#1
10:48
2/12
▲
BI1 0 CB1 contact
BI2 0 DC power sup.
BI3 0 Trans-T Comm1
▼
BI3 0 Trans-T Comm2
BI4 0 ARC-Block1
BI5 0 Indi. Reset
sub-menu
LAN
61580STAT
6F2S1915 (0.46)
1/4
>
>
>
>
◄
1/12
GRZ200 (Soft 031 & 032)