Toshiba GR200 Series Instruction Manual page 1336

Relay and control software
(v)
Verifying relay software is possible to check the codes at Positon 'S, G, and T' on Software
nameplate. For example of Figure 13.3-5, the IED has '032' software†. This IED can operate in
the IEC61850 protocol‡.
7
- 1 0 3 2 - 6 6 2 - 3 E
GRZ200- --
TOSHIBA ENERGY SYSTEMS & SOLUTIONS CORPORATION
Figure 13.3-5 Software nameplate example on the rear
†Note: For more information about relay functions, see
‡Note: For more information about the communication, see
protocol
.
Flange covers and labels
(vi)
Two flange covers (blue ones in Figure 13.3-6) are included in the package. The user can attach
them on the IED when mounting into the rack (see succeeding section
Figure 13.3-6 Flange covers and labels attached on IED
Positions
S G T E F U
Pockets for labels
Function keys label
- 1315 -
9 V
Selected language
Selected protocol
Selected software
Chapter Relay application
Chapter Communication
LEDs label
Flange covers
6F2S1915 (0.46)
.
Rack mounting
).
GRZ200 (Soft 031 & 032)