Toshiba GR200 Series Instruction Manual page 1176

IP setting example [RedundantMode]=PRP or HSR
(vi)
When PRP or HSR is set for the setting [RedundantMode], the user can apply single IP address
in the IED. The table below shows that both Port A and B have the same IP address.
Table 11.2-6 Default IP address for PRP/HSR operation
Protocol IEC61850(GOOSE)
IP address at
Port A†
192.168.1.11
IP address at
Port B†
†Note: Address '192.168.1.11' is set as default. Either port A or B is allowed to operate.
SNTP
192.168.1.11
- 1155 -
6F2S1915 (0.46)
GR-TIEMS® /
MULTIPLOG®
192.168.1.11
GRZ200 (Soft 031 & 032)