Toshiba GR200 Series Instruction Manual page 1323

description: Binary IO Module
Figure 12.8-5 Binary input menu
Figure 12.8-6 is a case when IO#3 (Slot#03) is selected.
Figure 12.8-6 Setting menu for Slot #3 module
For example, if the user wishes to simulate binary input circuit #1 (BI1) on the
BIO1A module at IO#3 slot, the user can select SLOT3-BI01-SET screen, as shown
in Figure 12.8-6).
Figure 12.8-7 Setting menu after selecting "Slot #3-BIO1-SET"
The user can then make the following selections on the screen and configure the
items required for simulation.
 ON:
BI1 output is set forcibly to ON(Logic level=high(1)) regardless of
the actual input signal.
 OFF: BI1 output is set forcibly to OFF(Logic level=low(0)) regardless of
the actual input signal.
 Normal: Actual inputs are applied.
Use the screen shown in Figure 12.8-7 only to configure the BI signals for the
)
Binary Input
10:48 1/2
Slot#1 >
Slot#3 >
Slot#3
10:48 1/19
BIF OP +
Slot3-BIO1-SET +
Normal
Slot3-BIO2-SET +
Normal
Slot3-BI03-SET +
Slot3-BIO1-SET
10:48 1/3
Normal
Off
On
- 1302 -
6F2S1915 (0.46)
GRZ200 (Soft 031 & 032)