Toshiba GR200 Series Instruction Manual page 1347

Hide thumbs Also See for GR200 Series:

1 Time counter, precision timer

1 PC (not essential)

Relay settings

Before starting the tests, it must be specified whether the tests will use the user's settings or

the default settings.

Visual inspection

After unpacking the product, check for any damage to the IED case. If there is any damage,

the internal module might also have been affected. Contact the vendor.

Relay ratings

Check that the items described on the nameplate on the front of the IED conform to the user's

specification. The items are: relay type and model, AC voltage, current and frequency ratings,

and auxiliary DC supply voltage rating.

To examine the IED with a PC locally, connect the PC with the IED using a USB cable. The

GR-TIEMS software is required to install in the PC.

During commissioning and maintenance, check wire connection and observe relay output

signals. The user can see the signals whether the relay operations are appropriate or not.

6F2S1915 (0.46)

GRZ200 (Soft 031 & 032)