Advertisement
Available languages
Available languages
6 Data transfer between MyoBoy and the PC
The data transfer between the 757M11=X-Change MyoBoy and the PC
takes place via a USB cable. Connect the USB cable included in the deliv
ery of the 757M11=X-Change MyoBoy with the PC. To install for the first
time, insert the CD with the "USB Drivers" inscription and follow the instruc
tions on the screen. Connect the electrode adapter and the ground elec
trode cable to the MyoBoy hardware as well to provide for the transfer of
data.
INFORMATION
Please note that the latest USB driver version must always be installed to
connect to the 757M11=X-Change MyoBoy. You can download the latest
driver version from the following site: http://ottobock.com/en/datastation.
The latest version can also be downloaded via the "software update" func
tion (Software Updates).
INFORMATION
The installation dialogue is completed twice.
INFORMATION
Cybersecurity
► Keep your operating system up to date and always install any available
security updates.
► Protect your computer from unauthorised access (e.g., by using virus
scans, password protection etc.).
► Do not use unsecured networks.
► Please contact the manufacturer if you suspect cybersecurity prob
lems.
7 Data transfer between MyoBoy and the prosthesis
For better adjustment of the electrode and controls, the signals of the patient
can also be determined while the patient is wearing and using the prosthes
is. For this purpose please use the optionally available 757P39 MyoBoy
communication cable in combination with the 757Z184=2 or 757Z190=2 bat
tery receptacle set.
Alternatively, the 757P23 test adapter can also be used. This makes it easier
to identify and remedy faults.
20
Advertisement
