Download Print this page

Otto Bock 757M11 X-Change Instructions For Use Manual page 19

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 14
NOTICE
Operating the product very close to other electronic devices
Limited function due to product malfunction.
► Do not stack the product during operation nor operate it in the immedi­
ate vicinity of other electronic devices in operation.
► If simultaneous operation cannot be avoided, monitor the product and
verify proper use in the existing setup.
NOTICE
Connected electrodes prevent the automatic shut-down.
Limited function/prevention of automatic product shut-down by connected
electrodes with open measuring inputs.
► Disconnect the electrodes after every use.
► Turn the device off manually.
INFORMATION
► The electrodes are to be placed on intact skin only and with as much
electrode-skin contact as possible.
► In case of strong interference from electronic devices, the position of the
electrodes should be checked and changed if necessary.
► If interference cannot be eliminated, please contact the Ottobock branch
responsible for your country.
► Allow the patient to rest during the adjustment of the electrodes. Muscle
fatigue leads to inconsistent results, and therefore the therapist will tend to
establish electrode settings that are excessively sensitive.
5 Scope of delivery
1 pc. "USB driver software" CD
1 pc. Electrode adapter
1 pc. Ground electrode
1 pc. USB cable
1 pc. MyoBoy hardware
1 pc. Carrying case
1 pc. Electrode armband
1 pc. Screwdriver
1 pc. Instructions for use (qualified personnel)
19

Advertisement

loading