Otto Bock 757M11 X-Change Instructions For Use Manual page 23

3) Allow to air dry in order to remove residual moisture.
11 Legal information
All legal conditions are subject to the respective national laws of the country
of use and may vary accordingly.
11.1 Liability
The manufacturer will only assume liability if the product is used in accord­
ance with the descriptions and instructions provided in this document. The
manufacturer will not assume liability for damage caused by disregarding the
information in this document, particularly due to improper use or unauthor­
ised modification of the product.
11.2 Trademarks
All product names mentioned in this document are subject without restriction
to the respective applicable trademark laws and are the property of the
respective owners.
All brands, trade names or company names may be registered trademarks
and are the property of the respective owners.
Should trademarks used in this document fail to be explicitly identified as
such, this does not justify the conclusion that the denotation in question is
free of third-party rights.
11.3 CE conformity
Otto Bock Healthcare Products GmbH hereby declares that the product is in
compliance with European requirements for medical devices.
The product meets the requirements of the RoHS Directive 2011/65/EU on
the restriction of the use of certain hazardous substances in electrical and
electronic devices.
The full text of the regulations and requirements is available at the following
Internet address: http://www.ottobock.com/conformity
12 Technical data
Ambient conditions
Storage (with and without pack­
aging)
Transport (with and without pack­
aging)
+5 °C/+41 °F to +40 °C/+104 °F
Max. 85%relative humidity, non-
condensing
-20 °C/-4 °F to +60 °C/+140 °F
Max. 90% relative humidity, non-
condensing
23