Download Print this page

Otto Bock 757M11 X-Change Instructions For Use Manual page 16

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 14
The product is intended exclusively for use with the approved components
(Combination possibilities).
The product may only be used in a controlled environment indoors (ortho­
paedic workshop, gait laboratory) under the supervision of trained, qualified
personnel. The patient must not be left unattended while wearing the
product.
3.3 Contraindications
All conditions which contradict or go beyond the specifications listed in
the section on "Safety" and "Indications for use".
3.4 Qualification
The fitting of a patient with the product may only be carried out by an O&P
professional.
4 Safety
4.1 Explanation of warning symbols
Warning regarding possible risks of accident or injury.
CAUTION
Warning regarding possible technical damage.
NOTICE
4.2 Structure of the safety instructions
CAUTION
The heading describes the source and/or the type of hazard
The introduction describes the consequences in case of failure to observe
the safety instructions. Consequences are presented as follows if more
than one consequence is possible:
>
E.g.: Consequence 1 in case of failure to observe the hazard
>
E.g.: Consequence 2 in case of failure to observe the hazard
► This symbol identifies activities/actions that must be observed/carried
out in order to avert the hazard.
4.3 General safety instructions
CAUTION
Non-observance of safety instructions
Personal injury/damage to the product due to using the product in certain
situations.
16

Advertisement

loading