Otto Bock 757M11 X-Change Instructions For Use Manual page 18

NOTICE
Mechanical stress on the product
Limited function due to product malfunction or damage.
► Do not subject the product to mechanical vibrations or impacts.
► Check the product for visible damage before each use.
NOTICE
Operating the product outside of the permissible temperature range
Limited function due to product malfunction or damage.
► Avoid operation in areas outside the permissible temperature range
(see page 23).
NOTICE
Operating near sources of strong magnetic or electrical interference
(e.g. theft prevention systems, metal detectors)
Limited function due to product malfunction.
► Avoid operating the product in the vicinity of sources of strong magnet­
ic and electrical interference (e.g. high-voltage lines, transmitters,
transformer stations, computer tomographs, magnetic resonance tomo­
graphs, etc.).
► Use the product only in orthopaedic workshops, or during in-patient
stays in rehabilitation facilities.
NOTICE
Insufficient distance to HF communication devices (e.g. mobile
phones, Bluetooth devices, WiFi devices)
Product malfunction due to interference during data transfer.
► Therefore, keeping the following minimum distances to these HF com­
munication devices is recommended:
• Mobile phone GSM 850 / GSM 900: 0.99 m
• Mobile phone GSM 1800 / GSM 1900 / UMTS: 0.7 m
• DECT cordless phones incl. base station: 0.35 m
• WiFi (routers, access points ...): 0.22 m
• Bluetooth devices (third-party products not approved by Ottobock):
0.22 m
18