Otto Bock Start B2 Instructions For Use Manual page 22

Use
29
Removing the leg support – elevating leg support
1) Fold the foot plate up.
2) Pull back the leg support release lever (see fig. 31, item 1).
3) Fold the leg support out 90° (see fig. 32, item 1) and pull up to detach (see fig. 32, item 2).
Attaching the leg support – elevating leg support
1) Hold the leg support 90° out to the side (see fig. 32, item 1) and insert it into the leg support retainer (see
fig. 32, item 2).
2) Swing the leg support into the direction of travel until it engages (see fig. 31).
3) Fold the foot plate down.
31
Adjusting the angle – elevating leg support
1) Push the release lever on the foot support forward (see fig. 33, item 1).
2) Set the angle (see fig. 33, item 2).
3) Let go of the release lever. The new angle setting is locked.
33
22
30
32
Start B2