Table of Contents
Advertisement
Settings and assembly instructions
26
7.10 Installing and adjusting the lap belt
CAUTION
Incorrect approach to the adjustment process
Injuries, malpositions, illness of the user due to adjustment errors
► The belt system may only be installed by qualified personnel.
► The qualified personnel is responsible for individual positioning and fitting of the belt system.
► Excessively tight adjustment of the belt system may lead to unnecessary pain or illness of the user.
► Adjusting the belt system too loosely can cause the user to slide into a dangerous position. In addition, the
fastening snaps could open unintentionally if they slide against hard parts of clothing (e.g. buttons).
► For proper installation and adjustment, follow the instructions for use included with the product.
CAUTION
Lack of instruction
Injuries, malpositions, illness of the user due to information errors
► The qualified personnel is responsible for making sure that the user and/or attendant/nursing staff has under
stood the proper adjustment, use, maintenance and care of the belt system.
► In particular, ensure that the user and/or attendant/nursing staff knows how to quickly loosen and open the
product to avoid delays in case of emergency.
The lap belt (seat belt) is screwed to the respective back support tube.
1) Screw the lap belt in place on the respective indicated part of the back support tube (see fig. 28, item 1/2).
2) Tighten the mounting screws to 7 Nm.
3) Adjust the lap belt. Information on the settings can be found in the manufacturer's instructions for use accom
panying each product.
28
20
27
Start B2
Advertisement
Table of Contents
