I Priority Watch Operation - Icom IC-R5 Instruction Manual

7
PRIORITY WATCH

I Priority watch operation

D D Memory channel watch and memory scan watch
q Select VFO mode; then, set an operating frequency.
• TV channel can also be selected.
w Set the watching channel(s).
For memory channel watch:
Select the desired memory channel.
For memory scan watch:
Select memory mode, or the desired bank group; then,
push [MODE•SCAN] for 1 sec. to start memory/bank scan.
e Push [TS•SET] for 1 sec. to enter set mode.
r Rotate [DIAL] to select "PRIO" item.
t While pushing [FUNC], rotate to turn the priority watch ON.
• Select "BELL" if the priority beep function is necessary.
33
• Priority setting item
[DIAL]
[FUNC]
• Priority ON
[TS•SET]
• Priority beep ON
y Push [TS•SET] to exit set mode and start the watch.
• "PRIO" indicator appears.
• The receiver checks the memory/bank channel(s) every 5 sec.
• The watch resumes according to the selected scan resume con-
dition. (p. 31)
• During priority watch
FM P SKIP
PRIO
Monitors VFO frequency
for 5 sec.
• During priority watch with priority beep
FM P SKIP
PRIO
Emits beep and blinks "S" indicator when a signal is
received on a memory (bank) channel.
u Push [TS•SET] to cancel the watch.
FM
PRIO
Pauses on a memory
(bank) channel when a
signal is received.
FM
PRIO