I Erasing/Transferring Bank Contents - Icom IC-R5 Instruction Manual

I Erasing/transferring bank contents

Contents of programmed memory channels can be or trans-
ferred to another memory.
INFORMATION: Even if the memory bank contents are
cleared, the memory channel contents still remain pro-
grammed.
qSelect the desired bank contents to be transferred or
erased from the bank.
➥ Push [V/M•S.MW•~] to select memory mode.
➥ While pushing [BAND•
the desired memory bank group.
➥ Rotate [DIAL] to select the bank channel.
• Bank initial stops blinking.
• Select the bank channel with [BAND•
sired.
• Bank initial blinks.
wPush [V/M•S.MW•~] for 1 sec. to enter select memory
write condition.
• 1 short and 1 long beeps sound.
• Displays the original memory channel number automatically and
" " indicator and memory channel number blink.
• Do not hold [V/M•S.MW•~] for more than 2 sec. otherwise the
bank contents will be copied to VFO.
Push
FM DUP SQL T
], rotate the [DIAL] to select
] and [DIAL], if de-
for 1 sec.
FM DUP SQL T
MEMORY CHANNELS
eWhile pushing [MODE•SCAN], rotate [DIAL] to select
"BANK" item.
• Pushing [MODE•SCAN] several times, "BANK" item is also se-
lectable.
rWhile pushing [BAND•
sired bank group to be transfer.
• Select "-- -- -- --" indication when erasing the contents from the
bank.
When transferring
t Rotate [DIAL] to select the desired bank channel.
yWhile pushing [MODE•SCAN], rotate [DIAL] to select
"S.MW" item.
• Pushing [MODE•SCAN] several times, "S.MW" item is also se-
lectable.
u Push [V/M•S.MW•~] for 1 sec.
], rotate [DIAL] to select the de-
When erasing
5
5
24